Titus Wireless Charging Power Bank
116646
10
Description: Titus provides 4000mAh of power storage and features a 5W wireless phone charger that is compatible with devices enabled for QI wireless charging. It will charge most modern phones including iPhone 8 upwards, Samsung Galaxy S6 upwards and many more. Simply place a compatible device on the round silicone pad for convenient wireless charging. Titus also offers conventional charging for almost any phone and is easily recharged from a USB port or a mains adapter. It has an input power of 5V/1.5A and an output power of 5V/2.1A.
Supplied in a black box with a Micro-B USB cable and an instruction leaflet. An optional EVA carry case and a triple connector cable are available on request. Titus laser engraves to an oxidised white colour.
Colour: Black.
Dimensions:
- Powerbank: L 118mm × W 66mm × 11mm.
- Carry case: L 174mm × W 110mm × 33mm.
Packaging: Individual box or optional carry case.
Price: from NZD $20.63 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
- Battery Capacity: 4000mAh
- Battery Type: Rechargeable Lithium
- Input: Micro
- Output: USB
- On/Off Mechanism: Power Button
- Battery Indicator: Power Level LED Indicators
- Charge Time (via Mains Adaptor): Approx. 8 hours
- Input Cable: Micro
- Wireless Charging Position: Flat
- Wireless Output: 5W
- Charging Pads: 1
- Max. Wireless Induction Distance: 6mm
- Wireless Charging Frequency: 110
- Wireless Charging Indicator: Single LED
- Casing: Acrylonitrile Butadiene Styrene (ABS)
- Wireless Charging Surface: Silicone
- Gift Box: Cardboard
-
Specific Colour Print Power bank (top or bottom): 50mm × 30mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
(Positions)- 1
- 2
-
Full Colour Print (Direct Digital) Power bank (top or bottom): 50mm × 30mm×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
(Positions)- 1
- 2
-
Laser Engraving Power bank (top or bottom): 50mm × 30mm .×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
(Positions)- 1
- 2
-
-
Specific Colour Print Carry case: 65mm × 30mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
-
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Black | 18 | - |
| Extra Large Carry Case | 1250 | Early Oct |
| Triple Connector Cable | 7600 | Early Oct |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).
