Xenotec 10K Power Bank
113547
10
Description: Next generation power banks with a massive 10 000mAh capacity that utilise twin high density lithium ion batteries to produce an incredible power to size ratio. It is small enough to carry in a pocket yet hill fully charge an average phone approximately three times. Xenotec will also charge tablets and other compatible electronic devices with the option of charging two devices at once.
It has a 5V/2.1A power output and a handy power gauge. The input power is 5V/2.0A which allows a very fast recharging time of 5–6 hours and it can be recharged over 500 times from any USB port or a mains adapter.
Comprehensive instructions and a Micro-B USB cable are included. An optional EVA carry case and a triple connector cable are available on request.
Colour: Black.
Dimensions:
- Power bank: L 88mm × W 55mm × 16mm.
- Carry case: L 120mm × W 120mm × 52mm.
Packaging: Individual black box or an optional carry case.
Price: from NZD $30.44 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
- Battery Capacity: 10
- Battery Type: Rechargeable Lithium
- Input: Micro
- Output: USB
- Output 2: USB
- On/Off Mechanism: Power Button
- Battery Indicator: Power Level LED Indicators
- Charge Time (via Mains Adaptor): Approx. 6 hours
- Input Cable: Micro
- Casing: Acrylonitrile Butadiene Styrene (ABS)
- Gift Box: Cardboard
-
Specific Colour Print Power bank: 60mm × 40mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
-
Full Colour Print (Direct Digital) Power bank: 60mm × 45mm.×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
-
Specific Colour Print Carry case: 65mm × 30mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
-
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Black | 260 | - |
| Large Black Carry Case | 280 | Early Aug |
| Triple Connector Cable | 7600 | Early Oct |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).
