Onyx Writing Set
123612
10
Description: Luxurious notebook and pen gift set with matte black theme, beautifully presented in a black gift box. The hard cover notebook has 80 leaves (160 pages) of unique black 110gsm unlined paper, a thermo PU cover, an elastic closure and a bookmark ribbon.
The metal twist-action ballpoint pen has a lacquered matte black barrel, metal trim and 130m of silver gel ink. The Onyx Writing set also includes three spare pen refills.
Colour: Black.
Dimensions:
- Notebook: L 215mm × W 145mm × 18mm
- Pen: Diameter 12mm × 138mm × 15mm (includes clip)
Packaging: Individual gift box.
Price: from NZD $17.82 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
- Notebook Cover Type: Hard
- Notebook Bookmark Ribbon: Yes
- Notebook Size: Medium
- Notebook Page Colour: Black
- Notebook Page Edges: Rounded
- Notebook Binding Method: Case
- Notebook Leaves: 80
- Notebook Page Weight: 110gsm
- Notebook Approx. Cover Thickness: 2.5mm
- Notebook Page Design: Unlined
- Notebook Closure Method: Elastic Band
- Pen Writing Distance: 500m (Including the provided spare refills)
- Pen Refill Type: Gel
- Pen Laser Engrave Finish: Mirror
- Pen Refill Colour: Silver
- Pen Mechanism: Twist Action
- Pen Barrel Finish: Matt Lacquer
- Pen Trim: Black
- Country Of Origin: China
- Notebook Cover: Polyurethane (PU)
- Notebook Pages: Offset Paper
- Pen Barrel: Brass
- Pen Clip: Iron
- Pen Tip: Brass
- Pen Ball: Tungsten Carbide
- Pen End Cap: Brass
- Gift Box: Cardboard with a Low
-
Specific Colour Print Pen: Positions G & I—35mm × 6mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
(Positions)- 1
- 2
-
Specific Colour Print Pen: Positions F & H—30mm × 6mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
(Positions)- 1
- 2
-
Laser Engraving Pen: Positions G & I—35mm × 6mm.×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
(Positions)- 1
- 2
-
Thermo Debossing Notebook (Front): 115mm × 90mm.×
Debossing
Debossing is produced by pressing a hot engraved metal plate into the surface of a product with a lot of pressure. This produces a permanent image below the products surface.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the product and is permanent.
- The product can be shipped as soon as heat pressing is finished.
Limitations
- Fine detail is not possible.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Thermo Debossing Notebook (Back): 80mm × 80mm×
Debossing
Debossing is produced by pressing a hot engraved metal plate into the surface of a product with a lot of pressure. This produces a permanent image below the products surface.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the product and is permanent.
- The product can be shipped as soon as heat pressing is finished.
Limitations
- Fine detail is not possible.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Thermo Debossing (XL) Notebook (Front): 115mm × 180mm.×
Debossing
Debossing is produced by pressing a hot engraved metal plate into the surface of a product with a lot of pressure. This produces a permanent image below the products surface.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the product and is permanent.
- The product can be shipped as soon as heat pressing is finished.
Limitations
- Fine detail is not possible.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Thermo Debossing (XL) Notebook (Back): 80mm × 180mm×
Debossing
Debossing is produced by pressing a hot engraved metal plate into the surface of a product with a lot of pressure. This produces a permanent image below the products surface.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the product and is permanent.
- The product can be shipped as soon as heat pressing is finished.
Limitations
- Fine detail is not possible.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Black | 2450 | - |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).