SPICE Waste2Gear Computer Bag
126950
10
Description: Water-resistant laptop bag which is 100% carbon neutral and features a main zippered pocket with an internal padded laptop compartment, a zippered front pocket to easily access belongings on the go. Perfect for travel, the bag has an adjustable padded shoulder strap, a luggage trolley pass through and woven carry handles.
This computer bag fits laptops up to 15.5″ and has a capacity of 14L.
SPICE strive to create extraordinary products that have a positive impact on the planet. Their Waste2Gear range uses recovered ocean plastics, which are gathered, cleaned, and converted into fibres and woven into long-lasting fabric.
Colour: Black
Dimensions: W 390mm × H 330mm × gusset 100m. Handle length: 280mm.
Packaging: Loose Packed
Price: from NZD $31.63 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Full Colour Print (Resin Coated Finish) 46mm × 26mm×
Resin Coated Finish
Resin coated finish is produced by printing the artwork onto a vinyl material with strong adhesive on the reverse. The branded area is coated with a crystal clear resin which is allowed to dry. Once dry, the finished decal is applied to the product and the adhesive forms a permanent bond.
Advantages
- Ideal for producing vivid full colour images as well as spot colour branding.
- Produces a stunning 3D effect that elevates the perceived value of a product.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Branding can bleed off the resin coated area.
Limitations
- Only approximate PMS colours can be reproduced.
- The resin requires a one day curing period before the product can be shipped.
- Metallic gold and silver colours are not available.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
Laser Engraving 37mm × 17mm×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Full Colour Print (Colourflex Transfer) 200mm × 120mm×
Colourflex Transfer
Colourflex transfers are used for branding fabrics and are printed on transfer paper using a digital printing machine then heat pressed onto the product.
Advantages
- Cost effective method for producing spot colour or full colour transfers.
- Crisp, clear artwork reproduction is possible even on textured fabrics.
- Has a matt finish and will not crack or fade under normal circumstances.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- A thin, clear line of glue can sometimes be seen around the edges of the image.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
-
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Black | 180 | Early Jul |
| Plate | 540 | Early Jul |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).
